The scientists' research paper, published on the online edition of The Journal of the American Chemical Society, showed how lithium-ion batteries with anodes built with what the research team calls PEFM can store 30% more power than those made with the more common aggregated carbon particles. Previous research from the team had produced PFM, the predecessor of PEFM. The Berkeley Lab scientists' work follows similar developments launched at the 26th EU PVSEC in Hamburg in 2011.
Gao Liu, who was a co-lead author of the paper, said, "In addition to developing this binder, we developed a method to engineer and test ways to improve it. We are continuing to use those tools, and now we are approaching an ideal design."
In their paper, Liu and Wanli Yang explained how they and their team modified the original binder to increase its capacity to transport positively-charged lithium ions. The performance limits of the original polymer binder had been determined by its less-than-ideal transport of lithium ions.
During a charging cycle, lithium ions are transported within the binder to the embedded silicon particles through electrolyte uptake, which consists mainly of organic solvents filled with lithium ions in solution. As a result of the improved ion flow, the specific capacity of the silicon anode made with the new binder rose from 2,100 mAh/g to 3,750 mAh/g.
"It means we are using 100% of the silicon particles embedded in the conducting polymer binder," said Liu. "That makes it pretty close to the ‘ideal' binder."
Liu said his team will continue to fine-tune its conducting polymer binders. The next goal is to find materials that offer comparable performance at lower cost. Significant testing will determine whether batteries made with the new silicon composite anodes are as durable as those made with graphite.
Popular content
The teams work was funded by the Office of Vehicle Technologies of the U.S. Department of Energy, under the Batteries for Advanced Transportation Technologies (BATT) program, and by a University of California Discovery Grant.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
Share
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.