Skip to content

Modules & Upstream Manufacturing

US solar industry calls for domestic content rules to support manufacturing

A recent report from the Solar Energy Manufacturers for America Coalition (SEMA) shows that with stronger support in the early stages, US module manufacturers would rely less on imports from Chinese-owned companies for materials.

New design for organic/CIGS tandem solar cells promises 27.46% efficiency

Scientists in the Middle East designed a flexible two-terminal organic/CIGS tandem solar cell for wearable applications. The device achieved an open-circuit voltage of 1.89 V, a short-circuit current density of 17.55 mA/cm2, and a fill factor of 82.79%.

Tracker sensors for agrivoltaics

Sensors from German electronics manufacturer SICK are used in solar PV tracking systems since 2021. Now they are making their way into agrivoltaic applications.

Vast majority of German farmers ready to embrace agrivoltaics

A new survey conducted by Germany’s Fraunhofer ISE showed that 72.4% of the country’s farmers are considering the deployment of an agrivoltaic project. Among the main factors behind this choice, the researchers identified the additional source of income coming from solar power generation and the perceived usefulness of the technology.

Solar module prices remain steady amid unchanged market fundamentals

In a new weekly update for pv magazine, OPIS, a Dow Jones company, provides a quick look at the main price trends in the global PV industry.

Environmental sustainability in PV technology advancements – life cycle assessment of PERC modules

As photovoltaic (PV) technologies evolve, understanding their environmental implications is crucial for a sustainable energy transition. IEA PVPS Task 12 analyzes the environmental impact of passivated emitter and rear cell (PERC) technology in PV installations in comparison to the monocrystalline silicon technology (AI-BSF) and the trend towards installing horizontal singla-axis tracker systems as opposed to fixed tilt systems. Primary data from one PERC and tracker manufacturer enable this study’s conclusions. Using the life cycle assessment (LCA) methodology, the study compares two locations in Italy with different irradiation patterns to evaluate the sensitivity to solar irradiation. The findings reveal that PERC technology and horizontal single-axis tracker systems demonstrate lower environmental impacts compared to Al-BSF and fixed tilt configurations.

Solar waste may reach 1.2 GW annually in Australia

A new report has called for large PV waste and recycling facilities to be established in major Australian cities as a matter of priority with solar waste predicted to reach 100,000 tonnes annually, equivalent to 1.2 GW per year, by the end of the decade.

European coalition urges EU to support PV manufacturers

A position paper from Solar Industry Regions Europe (SIRE) says a balance must be struck between protecting the European solar market and reaching the market objectives of the energy transition.

Wheat grows better in agrivoltaic facilities

New research from Italy shows lower wheat production under elevated agrivoltaic systems, but a simultaneous increase in nutritional value for livestock. pv magazine Italy spoke with the academics about their future research.

Suniva, Heliene to jointly produce US-made solar modules

Suniva has agreed to supply domestically manufactured solar cells to Heliene under a three-year sourcing contract, for integration into its solar modules.

This website uses cookies to anonymously count visitor numbers. View our privacy policy.

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close