Perhaps the residential solar component with the shortest life expectancy is the inverter, which is typically covered for only 10 years within a total system lifetime expectancy of 20 or more years.
However, many inverters fail to hit the 10-year mark. The Solar Engineering & Manufacturing Association (SEMA), based in Santa Ana, California, found several years ago that about 10 percent of all solar inverters had failed within seven years.
Such a failure rate could bode poorly for mega-installers that package large groups of residential installations as a securitization sold to unknowing investors. Who carries the warranty in such cases? Perhaps the installer, perhaps the insurer and perhaps its just hard to get satisfaction.
One residential installer highly focused on quality claims not to be a fan of either microinverters nor power optimizers. I dont have the metrics to confidently quantify specific failure rates, but lets just say that they are often enough to create a challenge for the service department, Steven Kane, the customer service and O&M engineer for Boulder, Colo.-based Namaste Solar, told pv magazine.
Interested in discussing the question raised?
Come to our roundtable at SPI in Las Vegas, 12 p.m. to 2 p.m. on September 14.
If you have examples of poor quality modules or installations and interesting discussion points pv magazine would be interested in your story and will treat all submissions with the utmost confidentiality.
To register for free, email us at:
I do see more stability with DC optimizers like SolarEdge, which is very good and failure do not occur with them too often, he says. The DC optimizers have ceramic capacitors, while the microinverters have electrolytic capacitors; the ceramic models are more stable and have a lower failure rate, he says.
Better communications will help. One problem with detecting failures is a breakdown in the network based data communications on the customer side; Im more of a fan of cellular connections independent of the customer line, explains Kane.
I dont know if it is a funding problem for the suppliers, but some companies do have extra hardware in stock, whether it is the same model or a newer, better one. It is absolutely a problem to get returned merchandise authorizations; you just cant get them from some manufacturers even if the equipment is still under warranty.
he cost of servicing residential solar systems will only rise as time goes on. We charge $200 for the first hour of a truck roll with two guys, then after materials costs, it can be significant to replace inverters and wiring on arrays, he says.
Editors Note: These issues and others will be explored at pv magazines Quality Roundtable at the Solar Power International trade show in Las Vegas on September 14.
4th pv magazine Quality Roundtable:
Building a Sustainable Future for Large-Scale Solar PV in the U.S.
-> Springhill Suites at Las Vegas Convention Center
-> Target audience: Asset managers, EPCs, operations & maintenance suppliers (O&M), system designers and independent engineers, financial institutions, insurance companies, investors, system owners (utilities, gencos, IPPs, as well as C & I system owners), certification and testing bodies, research institutes and universities, industry associations, government entities, codes & standards and regulatory agencies.
-> MCs: pv magazine
-> Register at no cost at: roundtable( at )pv-magazine.com
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: firstname.lastname@example.org.