Trina Solar, the world leading global PV and smart energy total solution provider, recently announced that it has begun mass production of n-type i-TOPCon double-glass bifacial modules. The best front side power output of a module with 144 half-cut i-TOPCon cells reaches 425 Wp and the best module efficiency reaches 20.7%.
The new i-TOPCon double glass PV modules integrate these n-type bifacial i-TOPCon cells with over 80% bifaciality, multi-busbar design, full square monocrystalline cells, dual-side and half-cut technologies. The highly efficient modules feature a lower temperature coefficient and low light induced degradation, greatly improving the actual power output. They also provide an extra 5-30% of power generation from their back side, and feature a 30-year linear power warranty.
The world record efficiency of 25.8% on small-area, single side TOPCon cells developed by Fraunhofer ISE has driven research and development of passivated contact solar cells by institutes and industry. In 2015, the State Key Laboratory of Photovoltaic Science and Technology (SKL PVST) of Trina Solar started research on a large-area bifacial TOPCon cell that is aimed for industrial mass production, naming it i-TOPCon cell. This year, Trina Solar achieved a front side median efficiency over 23% on i-TOPCon cells.
The i-TOPCon cell has a front boron emitter and a rear full-area passivating contact. After its development by the SKL PVST, it was transferred into full scale mass production in a workshop at Trina Solar’s Changzhou factory. Last month, Trina Solar announced that its SKL PVST had set a new world record of 24.58% for such n-type mono-crystalline silicon (c-Si) i-TOPCon solar cells. This result was independently confirmed by the ISFH CalTeC in Germany with a full-area measurement (244 cm²) including busbars.