8th Quality Roundtable at PV Taiwan

The joint presentation is now available for download here

Where: PV Taiwan,Taipei Nangang Exhibition Center, Hall 1, room 504bc

When: October 20, 9:55 am to 12 midday

Registration: the registration works through PV Taiwan's website

Organized in cooperation with global industry association SEMI, pv magazine will host the 8th Quality Roundtable at PV Taiwan, which comes to the Taipei Nangang Exhibition Center from October 18-20, 2017.

The roundtable will be focused on the quality and reliability of solar modules in climates which are humid, and often volatile. As solar continues to spread across the planet, tropical regions now represent some of the most important markets for PV technology. Another theme is delivering cost reductions while adopting state of-the-art cell and module technologies. Taiwan is already established as a leading region in module manufacturing technology, and now as it begins to grapple with reaching its ambitious installation targets for PV, in spite of its limited space, quality assurance is sure to become another important topic. pv magazine wants to initiate a change of mind-set with an interactive discussion between EPCs and cell/module technology experts. They will touch on ways to introduce efficiency gains into solar architecture, as well as future-proofing the cost of PV plant development.

All attendees are encouraged to participate and share their experience. The event will aim to facilitate conversation between industry segments and bring any issues regarding quality to the forefront, where they can be discussed and resolved. The discussion will be applicable to all types of potential solar PV installations, be they large-scale power plants, rooftop installations, or smart
energy systems.

Agenda

09:55 – 10:00Welcome and event overview
Mr. Jonathan Gifford, Editor at Large, pv magazine
10:00 – 10:10Opening Remarks -City of Taipei initiaves and support
致歡迎詞
San-Chung Wang/ 王三中, Deputy Commissioner, Department of Economic Development, Taipei City Government
10:10 – 10:15Solar Installation at Urban / High Density Area
都會區的太陽光電應用與未來趨勢
Mr. Leo Kuo / 郭泳欽, Senior Manager, Tatung Co.
10:15 – 10:20Quality issues in subtropical climate and Taiwan
太陽能系統在亞熱帶氣候與台灣環境下的挑戰與因應Mr. Jonathan Gifford, Editor at Large, pv magazine
Dr. Jay Lin /林敬傑, Chief Consultant, PV Guider / Technical Committee of CNS National Standards / the Leader of Task Forces in SEMI standard
10:20 – 10:25Floating PV – Taiwan potential and quality
優質水面型太陽能系統安裝面面觀
Mr. Cédric Jaeg, General Manager, Ciel & Terre Taiwan
10:25 – 10:35Poor quality case 1
案例討論 1
Mr. Jonathan Gifford, Editor at Large, pv magazine
Dr. Jay Lin /林敬傑, Chief Consultant, PV Guider / Technical Committee of CNS National Standards / the Leader of Task Forces in SEMI standard
10:35- 10:45Quality in cables and connectors
Mr. Joseph Yang, Division Manager, Stäubli (H.K.) Ltd. Taiwan Branch
10:45- 10:55Discussion period
綜合討論
Mr. Jonathan Gifford, Editor at Large, pv magazine
10:55- 11:10ACTIVE BREAK – Poster session
中場休息
11:10 – 11:15Selection rules for high quality PV module.
優質太陽光電模組選擇方案
Mr. Hung-Sen Wu / 吳鴻森, Deputy Division Director, Center for Measurement Standards, Industrial Technology Research Institute
11:15 – 11:25Manufacturing technology, production equipment and quality assurance
優質太陽能系統建置關鍵零組件: 從太陽能電池談電池製造技術與品質
Mr. Harris Li, General Manager, SCHMID Taiwan Ltd.
11:25 – 11:35Poor quality case 2
案例討論 2Mr. Jonathan Gifford, Editor at Large, pv magazine
Dr. Jay Lin /林敬傑, Chief Consultant, PV Guider / Technical Committee of CNS National Standards / the Leader of Task Forces in SEMI standard
11:35 – 11:45Field research findings
太陽能系統案場實例調查分析
Dr. Oakland Fu /付波, Photovoltaic & Advanced Materials Technical Manager, DuPont
11:45 – 11:50Quality in manufacturing Taiwan, module manufacturer viewpoint
台灣太陽能模組製造廠商論優質太陽能模組品質
Dr. CY Yu /余承曄 , Assistant Vice President, R&D, TSEC
11:50 – 11:55Manufacturing quality discussion
優質製造品質探討與交流Mr. Jonathan Gifford, Editor at Large, pv magazine
Dr. Jay Lin /林敬傑, Chief Consultant, PV Guider / Technical Committee of CNS National Standards / the Leader of Task Forces in SEMI standard
11:55 – 12:00Discussion buffer / conclusions and thanks
總結與討論

 

Initiative partner:

Gold sponsors:

L101_a_STAUBLI-Logo_col_A4

 

 

In collaboration with:

This page was last updated on December 14, 2017.