The regional administration of Navarra said it is now developing the first 9-km portion of the 198-km solar plant that is planned to be deployed on Spain’s largest artificial irrigation canal network.

The battery has a rated output of 5.5 kW and can be installed in outdoor environments. It is equipped with a hybrid power conditioner, a DC-to-DC converter, and a vehicle power supply adapter with a maximum output of 1.1 kWh.

Scientists in Sweden have developed a wide-gap ACIGS solar cell with hydrogen-doped indium oxide (IOH) transparent back contacts and silver alloying to increase the absorber bandgap energy. The device achieved an efficiency of 12.0%, an open-circuit voltage of 835 mV, a short-circuit current of 22.1 mA cm2, and a fill factor of 65.2%.

Chinese panel maker DAH Solar has developed a rooftop PV module with a new design that is claimed to enable water to wash away dust without the need for manual cleaning operations. The panel is offered in five versions with power output ranging from 450 W to 470 W and efficiency spanning from 20.85% and 21.78%.

pv magazine spoke with Marcin Jedrachowicz, sales manager for Eastern Europe at JinkoSolar, about the challenges and prospects of the thriving Polish solar sector. According to him, photovoltaics has now reached full maturity in the country and its growth rate is comparable to that of Europe’s largest PV markets.

A Slovakian startup has developed a photovoltaic-integrated arm that provides off-grid power for weeding and other small agricultural applications. In its largest configuration, the system is 18 meters long, has a capacity of 2.4 kW, and is able to cover a cultivated area of 994 m².

German scientists have reviewed all solar cell technologies with tuning capabilities and have identified all of their possible applications.

Chinese scientists have developed an ultralight solar cell with perovskite film based on a 3-µm-thick polymer. It purportedly has a power conversion efficiency in line with that of perovskite cells of conventional thickness.

Scientists in Italy have developed a module with an area of 0.2 sm and an efficiency of 2.7% in outdoor conditions, with a tilt angle of 60 C. They designed it by considering the trade-off between low losses and device sturdiness.

A German consortium led by Fraunhofer IEE aims to bring gallium nitride inverters closer to commercial viability. The primary goal of the research project is the optimization and miniaturization of inverters, including passive components such as cooling systems, casings, and mounting structures.