It is hoped that through its research and development, 1336 could help to "significantly" help to drive down the costs of solar manufacturing.
Under the project, it has been said that between 700 and 1,000 megawatts of silicon-based wafers could be produced annually, through a "revolutionary" manufacturing process, called Direct Wafer.
According to a statement released, "the innovative process could reduce manufacturing costs of the wafers by approximately 50 percent, dramatically cutting the cost of solar power."
This is achieved through reducing four separate manufacturing processes into one. This is said to also "greatly reduce" silicon waste through the formation of individual wafers directly from a bath of molten silicon. "A thin sheet of silicon freezes inside the direct wafer furnace and is then removed and laser-trimmed to size," added the statement.
At full production, the entire wafer formation process is said to be completed in just 25 seconds. This in comparison to conventional batch processing, which can take up to three days. The process is also said to require 90 percent less energy.
The first phase of the project will be located in Lexington, Massachusetts and is expected to fund 70 permanent jobs and 50 construction jobs. Details of the second phase are still to be confirmed. 1336, however, is confident that "hundreds" of additional jobs will be created.
1336 has already received governmental funding for the original development of its idea, in the form of a USD $4 million grant from the Department of Energys (DOEs) Advanced Research Projects Agency – Energy program, and a USD$3 million grant from the DOEs office of Efficiency and Renewable Energy.
Popular content
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
Share
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.