Skip to content

Italian research agency ENEA launches call for innovative agrivoltaics

The agrivoltaic facility may have a capacity of 1 to 3 MW and will have to be designed to comply with landscape requirements and the agricultural practices of NeoruraleHub, which applies a blue economy model to agriculture.

2

POLO-IBC solar cell with 23.7% efficiency

Scientists in Germany have developed two kinds of solar cells based on n-type doped electron-collecting poly-Si on oxide (POLO) junctions with aluminum-alloyed p+ contacts. Both devices are claimed to be possible upgrades of PERC technologies. The best-performant cell is an IBC device showing a power conversion efficiency of 23.71%, an open-circuit voltage of 711.5mV, a short-circuit current of 41.3mA/cm2, and a fill factor of 80.9%.

1

New solar tiles from Denmark

Danish BIPV specialist Dansk Solenergi has added two more tiles to its product range – an 18.15%-efficient dark grey panel and a 16.7%-efficient terracotta product. Both panels have an operating temperature coefficient of -0.34% per degree Celsius.

6

Double-junction perovskite-tin sulfide PV cell design with up to 28.92% efficiency

An Iranian-Italian research group has simulated a double-junction tandem solar cell based on perovskite and tin sulfide. They said that it can reach an efficiency rating of between 22.9% and 28.92%.

Masdar begins work on 230MW solar park in Azerbaijan

Construction on the project is planned to be finalized by the end of this year. The solar facility will likely supply power to the nearby located Garadagh Industrial Park.

3

Storing renewable electricity with supercritical CO2 heat pump

Researchers in Spain have designed a pumped thermal energy storage system that uses supercritical carbon dioxide as a heat pump and a heat engine. The proposed system is claimed to achieve an efficiency of 80.26% and an LCOS of €0.116/kWh.

6

Temperature-dependent model to calculate solar LCOE

Developed by researchers in Saudi Arabia, the novel approach considers both the temperature-dependent power yield and the solar module time to failure (TTF), among other factors. According to its creators, the model can be applied to all kinds of module and cell technologies.

2

Bifacial heterojunction solar cell with 22.84% efficiency, reduced indium consumption

A Dutch-Chinese research team has developed a bifacial heterojunction PV cell with a 67% reduction in transparent conductive oxide (TCO) use. The TCOs used for the cell are based on indium(III) oxide (In2O3), which is considered a technology-critical element by many experts.

4

Italian solar park to be linked to 5MW/10MWh of second-life batteries

A unit of Enel plans to deploy 5MW/10MWh of second-life batteries at Rome-Fiumicino International Airport, where a 30MW solar park is now under development. The modular storage system will include different second-life lithium-ion batteries, mainly based on nickel, manganese and cobalt chemistry, with usable storage capacity ranging from 10kWh to 25kWh.

2

Canadian Solar launches 420W rooftop solar module with 21.5% efficiency

The new product is part of the company’s HiKu6 series based on 182mm wafers. Its temperature coefficient is 0.34% and its electrical characteristics are claimed to be compatible with the most common photovoltaic inverters thanks to current values below 14A.

5

This website uses cookies to anonymously count visitor numbers. View our privacy policy.

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close