From pv magazine Italy
Italian startup 9-tech is developing a thermomechanical recycling process for end-of-life PV panels. Early results show an 87% recovery yield for materials like silicon, copper, and silver, with competitive energy consumption.
The recovered materials reportedly have a purity level high enough for reuse in other applications. The process includes manual disassembly to remove the aluminum frame and junction box, followed by cutting the panels for encapsulant removal in a continuous furnace designed to minimize energy loss, using a heat exchanger to reduce the heat required for treatment.
“The process consists of a first manual disassembly phase, in which the aluminum frame and the junction box, made mainly of plastic and copper, are dismantled,” 9-tech CEO Pietrogiovanni Cerchier told pv magazine. “The panels are then cut into 33 cm strips to reduce their size and make them suitable for the next phase. The panel strips are subjected to a heat treatment to obtain complete combustion of the EVA encapsulant.”
After this phase, copper strips, silicon cells, and glass are separated mechanically. Rollers first remove the copper wires, and the material is sieved to eliminate fine particles. A vibrating sieve then separates the PV cells from the glass.
The process also includes a fume abatement system with a pocket filter and activated carbon. Silicon is recovered as small foil pieces under 20 cm², and a washing treatment has been tested to remove silver and aluminum.
The company is optimizing processes for scaling up, completing lifecycle analyses, and exploring ways to reuse recovered materials, especially silicon, in various value chains.
The pilot plant achieved an 87% recovery yield. From 898 kg of PV panels, it recovered 581 kg of glass, 146 kg of aluminum, 14 kg of junction boxes, 26 kg of PV cells, 6 kg of copper tapes, 0.45 kg of silver, and 9 kg of dust.
“The analysis showed that the purity of the recovered materials was sufficiently high to be suitable for other applications,” Cerchier explained. “The recovered glass, aluminum and copper demonstrated that they meet the specifications for end-of-waste status, in accordance with point 1.2 of Annex I to Council Regulation (EU) No 1179/2012 of 10 December 2012.”
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
1 comment
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.