Technology and R&D

In a recent conversation with pv magazine Roland Valckenborg, business developer and project manager at the Netherlands Organisation for Applied Scientific Research (TNO), has described the results of a multi-year testing program for colored BIPV modules. Just a few years ago, it it was thought that power yield could be up to 50% lower than conventional panels, but tests have shown a difference of just 10%. Valckenborg says that losses can vary depending on the color of a panel.

A simulation by Utrecht University researchers indicated North Sea PV projects may perform better than a ground-mounted solar generator in the Netherlands. Offshore installations could generate 12.96% more power per year, according to the findings of the study, with the sea acting as a cooling system.

Solar forecasting company Solargis says the insight offered by Covid-19 industrial shutdowns into a renewables-driven future serves to emphasize the value of the chief commodity it trades in – data.

France’s National Institute for Solar Energy takes a look at the state of play in the European solar panel recycling industry.

Two different studies published this week show new advances in the use of plasmonic enhancement to improve performance and stability of perovskite solar cells.

Scientists in China have analyzed the impact of residual stress in triple-junction solar cells used in aircraft and satellite applications. The group observed damages such as holes, fractures of grid lines, cracks at the cell level, and fractures of the PV materials.

Scientists from Saudi Arabia have proposed a new PV panel cooling technique which employs an atmospheric water harvester. The device uses waste heat from the PV panel to collect atmospheric water at night and then releases it during the day to cool down the module. The researchers claim the device may also be improved to produce liquid water, which could be used for the cleaning of the modules.

Five testing laboratories led by Germany’s Fraunhofer ISE have begun a ‘round robin’ project to test the effects of ultraviolet light on polymer backsheet materials. Initial results indicate a route to accurate accelerated testing of backsheet UV stability over module lifetimes of 20 years-plus.

The developers of a perovskite device designed for use under illumination of 100-500 lux say it could be manufactured for $78-108 per square meter.

Scottish start-up Gravitricity is planning a project to store surplus power from renewables at Port of Leith. A 250 kW, grid-connected prototype facility will have its ability to stabilize the network tested. The system involves a 16m rig over a 150-1500m shaft.