Publish your press releases, for free, directly through our client portal. You can find instructions for creating an account and uploading articles, here.
WINAICO partners with Springers Solar and Enphase Energy to bring solar solutions to new real estate development in Queensland
This presents an opportunity to add the latest Enphase and WINAICO technologies on up to 2200 new residential homes.
Solarcentury reaffirms commitment to UK market with launch of new residential solar system
British designer Wayne Hemingway first to install Sunstation solar system on his roof.
Solar Frontier awarded Top PV Brand 2016 seal from EuPD Research
Leading CIS solar energy solutions provider recognized for stellar reputation among installers in the Netherlands.
Axion Power International, Inc., releases DIY Off-Grid Solar Light Kit as first consumer-ready product
Available for purchase online, the solar light kit mounts on a pole, but can also mount to a building.
Ontario expected to grow wind, solar and natural gas electrical generation capacity
y 2040, Ontario is expected to add more than 11 gigawatts of new capacity, primarily through wind, solar and natural gas generation.
High-end EL detector of Gsolar has been delivered to TUV
Successful cooperation between TUV and Gsolar shows that the performance of equipment has exceeded many renowned international brands in competition this time.
Analog Devices Power Conversion Platform Improves Safety, Reliability and Efficiency in Renewable Energy Applications
Analog Devices Inc. today announced its fully integrated power conversion platform for next-generation solar power, energy storage, and electric vehicle infrastructure applications. The platform, which includes processing, gate driving, and sensing components, was designed to enable new faster-switching architectures and accommodate increasing safety regulations. By integrating ADIs established iCoupler digital isolation technology with the new, breakthrough mixed-signal processor design (ADSP-CM41x), the platform simplifies system design for power inverter manufacturers while also improving system safety and reliability, and helping drive down the cost of renewable energy.
Learn about ADIs isolation products:
http://www.analog.com/en/products/interface-isolation/isolation.html
Learn about ADIs portfolio of mixed-signal control processors:
http://www.analog.com/en/products/processors-dsp/cm4xx-mixed-signal-control-processors.html
Learn about ADIs other renewable energy solutions:
http://www.analog.com/en/applications/markets/energy/renewable-energy-generation.html
Connect with engineers and ADI product experts on EngineerZone®, an online technical support community:
https://ez.analog.com/community/analog-microcontrollers
Learn about ADIs isolation products:
http://www.analog.com/en/products/interface-isolation/isolation.html
Learn about ADIs portfolio of mixed-signal control processors:
http://www.analog.com/en/products/processors-dsp/cm4xx-mixed-signal-control-processors.html
Learn about ADIs other renewable energy solutions:
http://www.analog.com/en/applications/markets/energy/renewable-energy-generation.html
Connect with engineers and ADI product experts on EngineerZone®, an online technical support community:
https://ez.analog.com/community/analog-microcontrollers
Power systems must be carefully designed to protect the end user from electric shock and the system from physical destruction by isolating current measurement from the power-handling circuitry and transient signals. Traditionally this protection has come at a price as the use of multiple redundant isolated components drives up both cost and system complexity. Analog Devices recently announced the ADSP-CM41x processor series, which features a revolutionary new design that integrates dual-core safety redundancy into a single chip. The ADSP-CM41x is an integral part of the power conversion platform, and is now the first and only processor of its kind to be awarded a Certificate of Safety Attestation, VDE-AR-N4105, from TUV-SUD. This provides designers with added confidence in their own certification process and a pathway to faster, more cost-efficient system development.
Also included in the platform are the AD740x sigma-delta-based A/D converter, which replaces larger, more expensive sensor modules to reduce system cost and improve isolated current measurement, and the ADuM413x series of isolated gate drivers, featuring iCoupler digital isolation technology.
Also included in the platform are the AD740x sigma-delta-based A/D converter, which replaces larger, more expensive sensor modules to reduce system cost and improve isolated current measurement, and the ADuM413x series of isolated gate drivers, featuring iCoupler digital isolation technology.
To assist developers in evaluating and designing with the platform, Analog Devices also announced the release of a new evaluation kit, the ADZS-CM419F-EZLITE. The kit is available now for $410.00.
JA Solar to Hold Annual General Meeting of Shareholders on June 15, 2016
JA Solar Holdings Co., Ltd., one of the world’s largest manufacturers of high-performance solar power products, today announced that it will hold its annual general meeting of shareholders (AGM) on Wednesday, June 15, 2016 at 10:30a.m., Beijing time at its headquarters located at No. 36, Jiang Chang San Road, Zhabei, Shanghai, the Peoples Republic of China. The shareholder record date is May 16, 2016.
A notice of the AGM describing the matters to be considered during the meeting is available via the AGM link in the Events & Presentations section at the Company’s investor relations website at http://investors.jasolar.com.
A notice of the AGM describing the matters to be considered during the meeting is available via the AGM link in the Events & Presentations section at the Company’s investor relations website at http://investors.jasolar.com.
SolaTrim Adds National Solar Distributors Inc. as Third Canadian Supplier for Innovative Solar Protective Barriers
More Canadian Solar Installers Adopt SolaTrim Protection System to Aid Compliance with Recent Pest Abatement Subrule Added to Canadian Electrical Code
SunLink VP Clara Nagy Debates Solar Mounting Cost Reduction Roadmap at GTM Solar Summit 2016
SunLink Corporation’s Vice President of Sales Clara Nagy will join other solar industry executives and thought leaders on The Roadmap to Low Cost Ground Mount Balance of Systems panel at todays Greentech Medias Solar Summit 2016 in Scottsdale, Ariz. As part of the panel discussion, Nagy will outline the immediate and long-term strategies SunLink is pursuing to lower balance of systems costs and help its customer partners successfully navigate the evolving global solar market.
SunLinks evolution into a full-scope solar project solutions company that offers highly engineered mounting solutions together with expert installation and O&M services and an advanced software platform positively impacts both hard and soft project costs for our customers. Now, customers are able to procure a combination of the most advanced mounting solutions, trusted services and next-gen data monitoring and SCADA controls provided by our hybrid cloud and security platform in an integrated package from a single partner, which reduces both their capital and portfolio management costs, explains Nagy.
SunLinks evolution into a full-scope solar project solutions company that offers highly engineered mounting solutions together with expert installation and O&M services and an advanced software platform positively impacts both hard and soft project costs for our customers. Now, customers are able to procure a combination of the most advanced mounting solutions, trusted services and next-gen data monitoring and SCADA controls provided by our hybrid cloud and security platform in an integrated package from a single partner, which reduces both their capital and portfolio management costs, explains Nagy.
I look forward to demonstrating how EnTech software platforms like VERTEX change solar project economics for the better, continued Nagy. In addition, Im eager to share how our industry leading R&D program is moving beyond the lab to collect real-time project performance data from the field using Internet of Things technology as a means to reduce material costs by enabling dynamic designs. Thanks to innovation inspired by EnTech convergence, the roadmap to lower costs has never been so interesting or exciting.
To see Clara Nagy at the Solar Summit, attend the balance of systems panel, The Roadmap to Low Cost Ground Mount Balance of Systems, today, May 11, at 3:00pm local time. For scheduling meetings at the conference and a demonstration of SunLinks new solar project intelligence platform VERTEX, contact sales@sunlink.com.
To see Clara Nagy at the Solar Summit, attend the balance of systems panel, The Roadmap to Low Cost Ground Mount Balance of Systems, today, May 11, at 3:00pm local time. For scheduling meetings at the conference and a demonstration of SunLinks new solar project intelligence platform VERTEX, contact sales@sunlink.com.
