Saving time and money – full control over your asset
This webinar will provide a deep dive into the functions of the O&M monitoring software of Gantner Instruments Environmental Solutions. Experience a live demonstration of the software on a real-world plant and ask your questions about best practices.
Performance modeling for accurate energy output and yield prediction of bifacial PV systems
Today Bifacial PV is becoming mainstream with capacity available at GW scale and corresponding utility scale projects globally, as the deployment of bifacial PV technology has proven to be the most effective solution to reduce the LCOE and increase the IRR of PV systems. Join our webinar to understand the impact of bifacial modules on the LCOE of the project, including calculating the higher energy generation level for different environmental conditions and installation setup.
How LG is shaping the smart home of the future – combining PV, battery storage, heat pump and more
LG share its view on the combination of PV, battery storage system and heat pump to cover all of the house’s heat consumption, and to discuss key components of its system in detail in our pv magazine webinar
Smart tracker design enabled by advanced testing
Next generation of wind tunnel testing can increase confidence for PV plant owners.
LeTID and the future of module degradation testing – control for defects to deliver lower LCOE
Light and elevated temperature induced degradation (LeTID) is a pain for investors and EPCs. In this webinar, Q CELLS will openly demonstrate how it ensures that the modules that it produces are LeTID free. The company pioneered research and investigation into this effect several years ago.
Greenwashing vs. verifiable sustainability: What’s the difference?
How green is PV? And why does it matter?
Assessing the impact of bifacial modules with transparent backsheet on savings and ROI
How much of an impact will the JinkoSolar Bifacial Swan module with transparent backsheet have on savings and optimizing ROI?
According to JinkoSolar, the bifacial panel with transparent backsheet can generate up to 415 Wp from the front side and 5 to 25% extra power gain from the rear side.
Optimizing the different parameters that influence bifacial gain with trackers
With the emergence of bifacial modules, tracker suppliers are in the process of figuring out the new optimal set-up with regard to tracker height, row spacing and tracking algorithms. The old paradigm of merely tracking azimuth position no longer applies.
In this webinar, we are joined by Soltec who believe they have a solution, and will share with you their expertise in tracking with bifacial modules. Colin Caufield, VP of Sales USA and Javier Guerrero, R&D Engineer PV from Soltec will present a summary of the results obtained from September 2018 to June 2019 at Soltec’s Bifacial Tracking Evaluation Center (BiTEC) in Livermore, California.
How to best deliver PV for corporate clients and profit for the burgeoning C&I market segment
System paybacks for commercial and industrial (C&I) rooftop systems throughout Europe can be as low as five to six years. But to do this, the solar array needs to be sized correctly to meet the specific customer need. Additionally, the underlying business case and technical solutions needs to be aligned.
Can solar tracking algorithms alone provide the solution to minimize energy losses on difficult terrain?
As developers are looking to install on hilly sites and sloped terrain for new projects, some are depending on tracker algorithms as a cure-all for undulating topography. Join our webinar to find out what combination of steps can be taken to mitigate energy loss.
