Commercial & Industrial PV

The Croatian government has allocated €60 million ($65.6 million) in subsidies for businesses to install 80 MW of renewables and 20 MWh of batteries.

UL 2941 provides testable requirements for energy storage and generation technologies on the distribution grid. The new cybersecurity protocol provides a framework for PV inverters, electric-vehicle chargers, wind turbines, fuel cells, and other distributed resources.

Mitani Sangyo, a Japanese industrial conglomerate, says that its new PV carport design is particularly suitable for snowy areas, as it offers snow load resistance of 150 cm.

The European Commission is now reviewing Italy’s new rules on agrivoltaics. They define which “innovative agrivoltaic systems” are entitled to the Italian government’s €1.1 billion ($1.2 billion) incentive scheme for agrivoltaics.

Researchers in India have designed a PV-powered earth-to-air heat exchanger to provide buildings with space heating and cooling. They say the proposed system could result in an annual energy gain of 8116.7 kWh.

IEA-PVPS has used an improved methodology to determine that newly installed PV capacity in 2022 must be somewhere between the 190 GW calculated by the International Renewable Energy Agency (IRENA) and the 268 GW announced by BloombergNEF. Its new “Snapshot of Global PV Markets 2023” report was built on data from a range of sources, including grid-connected and off-grid figures.

German module maker Luxor Solar and Japan’s AirWater are selling vertical PV systems for parking areas that can reportedly provide the same energy yield as conventional PV carports, but with less space. The system features 460 W heterojunction solar panels, power optimizers, and vertical racks.

A new report by Lazard compares the levelized cost of energy (LCOE) for various generation technologies on a $/MWh basis. It shows that utility-scale solar and onshore wind LCOE increased for the first time in 2023, at $24/MWh to $96/MWh for solar and $24/MWh to $75 MWh for wind. Nevertheless, the two renewable sources are still the economic frontrunners when compared to nuclear, gas, and coal.

Yingli is offering six versions of its 108-cell Panda 3.0 PRO modules, with power outputs ranging from 410 W to 435 W and efficiencies ranging from 21.0% to 22.28%.

Chinese manufacturer Projoy is selling a new microinverter with maximum power point tracking (MPPT) and power outputs ranging from 2.2 kW to 3 kW. The smallest version can can connect between four and eight solar panels, while the largest can link seven to eight modules.