The Chinese manufacturer said its new storage system is intended for use in residential and small commercial PV systems. It features a storage capacity of 30 kWh and a nominal voltage of 51.2 V.
Indian scientists built an inverted perovskite PV device that uses a self-assembled monolayer to suppress nonradiative recombination at the interface between the perovskite absorber and the hole transport layer. The cell achieved remarkable efficiency and was also able to retain the initial efficiency rating for 3,00 h.
Akuo plans to deploy 200 MWh of battery storage in New Caledonia, supplying 50 MW for three hours per day over 12 years. The facility will primarily support the operation of nickel mines.
The novel algorithm is based on the behavior of marine animal tunicates and reportedly provides remarkable results in terms of power errors. It was tested in four PV system configurations with five different shade patterns.
Sao Paulo-based Clean Energy Latin America says green hydrogen could be produced in Brazil at a levelized cost of hydrogen (LCoH) of $2.87 and $3.56 per kg in some strategic locations.
Researchers in China have summarized the technical issues hindering the development of hard carbon, which is regarded as the most promising anode for high-performance, commercial sodium-ion batteries.
Carrier, a US-based heating solutions provider, has introduced a new line of high-temperature heat pumps with capacities ranging from 30 kW to 735 kW, with hydrofluoroolefins as a refrigerant.
Called Geospatial Opportunity Mapping (GOMap), the new tool considers high-resolution information from both the local authorities and local utility companies. It is reportedly able to determine the number of rooftop or ground-mounted solar projects that can be deployed in a given area.
German battery manufacturer CMBlu is supplying its 5 MW, 10-hour-duration organic solid flow long-duration battery technology to a US utility project, featuring high-performance organic energy storage molecules.
Developed by Egyptian scientists, the PV-powered water pumping system may produce up to 181.8 m3 of water per day. The system consists of two PV arrays with each a capacity of 4.6 kW and a pumping unit made up of a 7.5 kW three-phase alternating current motor, a multistage submersible pump, a deep well, and a 15 kW inverter.
This website uses cookies to anonymously count visitor numbers. View our privacy policy.
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.