The BWRO unit, which has a treated water production capacity of around 11.80 ​L/h, was built with a pre-filtration module, a high-pressure DC pump, an RO module, and a post-treatment module. The PVT system was designed to meet the energy requirement of a high-pressure DC pump and a diaphragm-type circulation pump utilized to circulate soft water beneath the PV module for the active cooling of the panel itself.

In a white paper, the three Chinese module manufacturers have reiterated the well-known refrain “bigger is not always better.” Experts from the three companies compared the BoS costs of 182mm-wafer-based modules and 210mm products, and found that the former have a slight advantage in racking, foundation, and land costs.

Irish power and gas utility Bord Gáis Energy is supporting Danish developer Obton in the development and construction of several projects that competed in the country’s first Renewable Electricity Support Scheme (RESS) auction.

Norwegian researchers have conducted a study to assess the technical feasibility of solar parks in polar regions. They found out that snowdrifts may be a major issue but they also believe that snow accumulation can be reduced through snow fences and proper system design.

Swiss manufacturer Leclanché will build the new battery modules at its manufacturing facility in Yverdon-Les-Bains. These products can be used for transport applications such as marine, commercial vehicle, and railway.

A bridge crossing the Pò river in San Mauro Torinese, in northern Italy, is set to host a 300m long PV system designed to rely on special mounting structures and full-black modules. The local administration said the bridge was chosen as the rooftops and surfaces available are all located in landscape protection areas adjacent to the town’s most important historic building.

Saudi scientists built the cell’s electrode with a hole-transporting molecule called Br-2PACz and not with the commonly used PEDOT:PSS. It helped improve the photovoltaic cell efficiency by around 0.9%.

The move is intended at helping the solar sector recover from the delays caused by the Covid-19 crisis. The Taiwanese government has also granted a three-month grace period for project completion.

An international research team has designed a residential solar-plus-storage system based on gravity. The system was built with a solar power generator, a bulk booster charge controller, an inverter, a solenoid device, a deep cycle battery, a pulley block, a geared motor, a microcontroller, and wire ropes. Its creators said the system is ideal for regions with high solar radiation. They found that, due to its high electrical requirements, the system needs to rely on high-power solar modules with an output of over 500 W.

Goldi Solar is setting up a 2 GW factory in the Indian state of Gujarat, increasing its manufacturing capacity to 2.5 GW. The new facility will use micro-gap module technology to produce mono-facial and bifacial modules with peak power outputs exceeding 600 W.