Chinese-Canadian solar module manufacturer Canadian Solar has begun mass production of its 640-665 W panel series that was launched in October and includes the two monofacial, CS7L-MS and CS7N-MS series, and the two bifacial, CS7L-MB-AG and CS7N-MB-AG series.
“The nameplate production capacity of the HiKu7 and BiHiKu7 modules will reach 10 GW by the end of 2021, of which a significant portion has already been booked,” the panel maker stated. “The company will deliver the first batch of the new high-power, high-efficiency modules this month.”
According to the company's CEO, Shawn Qu, these high-power modules are manufactured with damage-free cell cutting, strict hot-spot control, and low-LeTID technology.
All the panels of the HiKu7 CS7N-MS series are produced with 210mm wafers and have dimensions of 2,384×1,303×35mm, a weight of 35.7kg, and feature 132 monocrystalline half cells. The manufacturer claims they can reduce balance of system costs by up to 5.7% and the levelized cost of energy (LCOE) of a project by up to 8.9% compared to conventional 445 W modules.
The module technology relies on Canadian Solar's own cell technology and module design, including hetero-type ribbon (HTR) and paving technology, which the company said improves performance with minimal cell spacing. The technology is said to combine the advantages of half-cell panels and paved modules.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: firstname.lastname@example.org.