A Japanese consortium is testing the durability and performance of lightweight, flexible perovskite solar modules at Osanbashi Pier, Yokohama City in windy and salt-air conditions. The outdoor trial is part of a larger 3-year perovskite solar technology research collaboration.
The three-month 1 kW perovskite solar module trial on Osanbashi Pier began in November 2024. Three Japan-based companies are participating in the outdoor seaport demonstration: Macnica, a technology and electronics supplier, Reiko, a thin film product manufacturer, and perovskite solar cell specialist Peccell Technologies, which was founded in 2004 as a Toin University of Yokohama spin-off by perovskite solar cell pioneer Tsutomu Miyasaka.
Miyasaka, whose academic career spans from the Toin University of Yokohama to the University of Tokyo, is the corresponding author of the widely-cited paper “Organometal halide perovskites as visible-light sensitizers for photovoltaic cells,” which was published in the Journal of the American Chemical Society in 2009 and described the first attempts to design PV technologies based on lead halide perovskites.
“The Osanbashi Pier test installation features 80 panels measuring 30 cm x 1 m each,” Miyasaka told pv magazine, noting that the modules have a power conversion efficiency of 10% and are manufactured in a roll-to-roll process with indium tin oxide on plastic (ITO-PET) films. “We are using a module based on ITO-PET films with a thickness of 125 μm and low sheet resistance of 12 ohm/m2,” he added, noting that Peccell is concurrently working on modules with higher efficiencies and greater durability.
The modules are installed in sequence to enable comparative verifications. Testing will also verify encapsulant and film durability. In addition, a new mounting system to enable easier attachment/detachment was developed to simplify the replacement of PV modules in the field.
The three-year perovskite solar technology development and demonstration initiative began in 2023 in Yokohama and is supervised by Miyasaka himself. The initiative is supported by the Japanese Ministry of the Environment (METI).
Other projects within the initiative will test the use of perovskite solar panels on wavy, corrugated roofs, and a third project will test the panels on light-framed structures, such as tents or polytunnel-type greenhouses. The target efficiency of the perovskite panels is 20% and the service life target is 15 years.
The aim is to make solar power generation possible on the 90% of roofs in Japan that cannot install conventional heavy silicon solar panels, as well as to decarbonize energy use of marine port terminals, ships, and trucks
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.