Skip to content

Technology

Novel residential solar-assisted heat pump system integrates PCM for heat storage

A British-Chinese research group has developed a novel heat pump concept consisting of a heat pump, the PCM tank, and tube solar heat collectors. Intended for demand shifting in space heating and domestic hot water (DHW) applications, the system is reportedly able to achieve a higher coefficient of performance than conventional heat pumps.

PV, storage may allow 53% of European households to end reliance on grid

A German-Swiss research team has calculated how many homes in Europe could be decoupled from external infrastructure with solar power, batteries, and hydrogen storage.

2

Solestial wins NASA contract to develop solar blanket wings for spacecraft

Solestial has secured a contract from the National Aeronautics and Space Administration (NASA), valued at roughly $849,900, to develop ultra-thin PV for solar blanket wings on next-generation spacecraft.

French startup unveils off-grid solar refrigerators

French startup Koolboks has developed off-grid solar refrigerators that offer continuous refrigeration for up to four days via solar modules, ice storage, and lithium-ion batteries. The units are available for rental and include two LED lighting bulbs and USB ports to charge phones.

Israel to use solar fences to protect villages

Against the backdrop of its war with Hamas, Israel has started allowing villages to install solar fences to improve protection for residents.

Black perovksite solar cell achieves 20.25% efficiency

The Chinese Academy of Sciences has developed a black perovskite solar cell that reportedly achieved the the highest efficiency ever reported for PV devices built with this perovskite material and a dopant-free hole transport layer based on the P3HT polymer. The cell was also able to retain around 93% of its original efficiency after continuous illumination for 570 h.

3

InfinityPV presents measurement system for roll-to-roll thin film PV manufacturing

A new imaging system for contactless defect detection in roll-to-roll printed thin film solar cell manufacturing lines is available from InfinityPV, a Danish printed electronics equipment manufacturer. The so-called ultrafast laser beam induced current mapping system is suitable for manufacturers of perovskite, organic, kesterite, copper indicum gallium diselenide (CIGS) and amorphous silicon PV foils and can be retrofitted into existing roll-to-roll lines.

Australian developer secures licenses for 8 GW green hydrogen project

Province Resources, which is developing an 8 GW green hydrogen project in Western Australia, has secured additional state licences for more than 600,000 hectares of land, as well as over 864 hectares of the seabed near Carnarvon.

Novel algorithm estimates global maximum power point in partially shaded PV systems

Developed by scientists in India, the global maximum power point (GMPP) technique is based on the voltage and current of strings in a PV array. The research group tested it in computer simulation, as well as through an experimental setup.

Ascent Solar announces 17.55% efficiency for CIGS tech

Ascent Solar, a US-based manufacturer, has achieved an efficiency of 17.55% for its copper, indium, gallium and selenide (CIGS) technology. It says it plans to release a new CIGS solar module with this efficiency rating soon.

This website uses cookies to anonymously count visitor numbers. View our privacy policy.

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close