Modules & Upstream Manufacturing

A European consortium consisting of Italian energy agency Enea and the French Alternative Energies and Atomic Energy Commission, among other entities, has developed a plan to build a low-emissions pilot line to recover critical and precious metals such as silicon, indium, gallium and silver. The line will be designed to reintroduce new materials and new products into the production cycle.

A U.S. court decision has reduced the Section 201 tariff rate from 18% to 15%, following a rate increase as part of Trump’s Proclamation 10101 in October 2020.

A 163 kW solar façade is powering the new building of Basel’s Office for Environment and Energy in Switzerland. Swiss manufacturer Megasol provided special modules on 3D fused glass for the vertical BIPV installation.

Developed by Brazilian construction materials provider Eternit S.A., the tile has a nominal power of 9.1 W and an average monthly generation capacity of 1.15 kWh. It is available in five colors and two versions with a classic or reinforced design.

Japanese energy company Sinanen offers a scalable solar carport that can host a minimum of four vehicles and can be deployed in the parking areas of factories and commercial buildings. The basic system is offered with a minimum capacity of 10.80 kW.

South Korean researchers have developed a process to produce ultra-thin wafers without sacrificing any of the substrates. Their technique is based on a new approach involving the use of plasma-assisted epitaxial growth, in order to increase internal defects and porosity, rather than reduce them.

The Chint group has also agreed to sell a portfolio of distributed solar projects with a capacity of 493 MW.

The Indian authorities have announced plans to provide more funding to help more manufacturers under its production-linked incentives scheme, which is designed to support gigawatt-scale manufacturing of high-efficiency solar modules.

The U.S. National Renewable Energy Laboratory says in a new report that costs for all types of PV systems continue to fall, although it notes that balance-of-systems costs have increased or remained flat across sectors this year.

Scientists in Japan and Europe investigated the long-term stability of perovskite solar cells utilizing layers of mesoporous carbon, building on previous work demonstrating the strong potential of this approach. This latest work demonstrates a light-soaking effect, which allowed them to fabricate cells that retained 92% of their initial performance after 3,000 hours in damp heat conditions – which the researchers say is equivalent to 20 years in the field.