TU Delft researchers build 23.4%-efficient heterojunction solar cell with localized front contacts
Researchers at the Delft University of Technology have developed a top-down processing method localized the front contact in heterojunction solar cells. The new technique reportedly improves a cell’s short-circuit current density enabling higher power conversion efficiency.
Low-cost conductive quantum dot inks for photovoltaics
An international research team has developed a method to economically synthesize and stabilize conductive colloidal quantum dot inks for solar applications. When used to make quantum dot films in large area PV devices they enabled a certified efficiency of 10%, with lab-sized cells based on the ink material achieving 13.40% efficiency.
Gautam Solar presents 23.69%-efficient 640 W TOPCon solar module
The Indian manufacturer said its new TOPCon solar panel is based on rectangular bifacial solar cells and is certified by the Bureau of Indian Standards (BIS).
EVA-induced degradation has significant impact on power losses in TOPCon solar modules
New research from UNSW shows that EVA-encapsulated TOPCon solar modules under damp-heat testing can suffer significant power losses and fill factor drops. The study describes metallization degradation mechanisms driven by EVA-generated contaminants and demonstrates the effectiveness of metallization adjustments in reducing EVA-induced degradation rates
WorldOne Energies commissions 1.2 GW solar module line
WorldOne Energies has commissioned a 1.2 GW solar module manufacturing line that will produce its Supreme series n-type tunnel oxide passivated contact (TOPCon) panels.
U.S. Commerce Department slaps unexpectedly high tariffs on solar imports
Coalition trade lawyer says the U.S. Department of Commerce’s final tariffs on solar cells and modules from Cambodia, Malaysia, Thailand and Vietnam are among the highest rates he’s ever seen.
How robotics is reshaping solar module installation
With module sizes increasing, labor shortages worsening and workplace safety risks escalating, automation is a necessity.
Avery Dennison debuts new pressure-sensitive tapes for PV modules
Avery Dennison has introduced a line of UV-resistant, pressure-sensitive adhesive tapes for PV modules. The new products support applications such as frame mounting, cell fixation, busbar bonding, and junction box installation.
Italian startup debuts waterproof carbon fiber solar panels for off-grid applications
Levante, an Italian carbon fiber solar PV design and engineering company, has introduced 110 W and 55 W panels for offgrid recreational applications. The modules are lightweight, semi-rigid and made with recycled carbon fiber material.
Teledyne Flir presents new PV inspection products
Teledyne Flir, a US-based sensing solutions company, has launched new PV inspection tools – including a clamp meter, irradiance meter, and I-V curve tracer – alongside two product kits targeting solar installers, utilities, and PV manufacturers.
