Researchers from Peru have developed a self-contained, deployable system that can reportedly quantify energy losses from dust accumulation on PV arrays before their implementation.
The proposed approach combines methods from neural networks and incremental conductance, which is one of the most commonly employed maximum power point tracking (MPPT) techniques due to its simplicity and low implementation complexity.
“This system leverages a combination of artificial neural networks (ANNs), electrical modeling, and incremental conductance-based MPPT,” the authors told pv magazine. “Unlike conventional methods that require either laboratory setups, operational PV plants, or high maintenance costs, our solution is easily deployable and provides real-time insights into soiling losses both pre- and post-implementation of PV systems.”
The proposed method was tested on a system containing a 5W monocrystalline silicon PV test module, a DC-DC single-ended primary inductance converter (SEPIC), a pyranometer, module temperature sensors, and a computer with a 28 nm ARM Cortex-172 processor that runs the ANN. In addition to the ANN predictions, the group tested the system using an electrical model that uses iterative solving, meaning it repeats the calculation multiple times until it gets a good result. Both systems use measured solar irradiance and temperature as inputs.
The testing took place between September 2020 and September 2021, and the PV module was cleaned once a month. The data from the first month was used to train the ANN model, using 14,000 measurements in 150 iterations. The electrical model, on the other hand, did not need training as it is based only on the measured data and the PV specs.
“Both models exhibited comparable performances in estimating a clean PV module’s energy output, with the ANN model demonstrating lower computational costs,” they said. “The ANN model also showed slightly better accuracy, with a mean absolute percentage error (MAPE) of 0.5% compared to 0.6% for the electrical model. These results indicate that while both models are effective, the ANN model offers advantages in terms of computational efficiency and adaptability for retraining to compensate for long-term module degradation.”
The results of the 1-year testing showed that with a monthly cleaning schedule, energy losses due to soiling oscillated between 4% and 7% during most months. Elevated losses of up to 10% were recorded in months with nearby construction activities. “Our findings demonstrate the system’s capability to accurately predict performance losses due to soiling without the need for a complete PV system setup,” the researchers highlighted.
Concluding their work, they added that “the Incremental Neuroconductance system presents a robust and flexible solution for quantifying soiling losses in PV modules, contributing to more effective maintenance schedules and improved PV plant performance.”
The system was presented in “Incremental neuroconductance to analyze performance losses due to soiling in photovoltaic generators,” published in Energy Reports. The research was conducted by scientists from Peru’s National University of San Agustín and the Pontifical Catholic University of Peru.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.