Skip to content

Modules & Upstream Manufacturing

Reducing solar module temperature with acrylic sheets

Jordanian researchers have developed a method using acrylic sheets to reflect and absorb unused solar radiation in PV power generation. The solution has the potential to decrease solar panel temperature by more than 14% and increase power yields by approximately 2%.

3

Potential benefits and challenges of PV-powered vehicles

The extent to which PV-powered vehicles contribute to a reduction of CO2 emissions depends on variables such as the carbon intensity of the local grid, driving patterns, and solar irradiation. The market introduction requires technical optimization of the PV, but also of the vehicles.

Wavelabs launches LED-based flashers for module manufacturers and R&D lab

The German PV testing equipment provider said its new Sinus-3000 Pro line is an ‘all-in-one system’ that can perform power measurements, bypass diode testing, insulation testing, visual inspection, and electroluminescence measurements. It is also offering the Sinus-3000 Advanced line for the testing of perovskite-silicon tandem, multi-junction and other new material cells.

Recom launches 460 W all-black TOPCon solar modules with 23.6% efficiency

Recom is offering five versions of its new all-black panels, with power outputs ranging from 440 W to 460 W and efficiency ratings of 22.5% to 23.6%. They feature 108 half-cut monocrystalline cells with n-type and back-contact technology.

Hurtigruten Norway plans wind-solar ship with 60 MWh of storage

Hurtigruten Norway. a cruise ship operator, said its new wind-solar-powered cruise vessel will be ready in 2030. It will have a storage capacity of 60 MWh.

All-perovskite tandem solar cell with 28.5% efficiency

A Chinese research team has fabricated an all-perovskite solar cell with a 3D/3D double-layer perovskite heterostructure that reportedly ensures improved charge extraction. The device achieved an open-circuit voltage of 2.112 V, a short-circuit current of 6.5 mA cm-2, and a remarkable fill factor of 81.9%.

1

German regulator warns of defective inverters in balcony PV systems

The German Federal Network Agency (Bundesnetzagentur) has identified issues with certain inverters that lack CE markings, instructions in German, or German retailer addresses. The defects render them ineligible for distribution or use in the country.

Off-grid solar kit with quick-swap modular batteries

US-based Runhood has introduced a modular battery design that directly connects to a portable solar array, so it can be quickly swapped in and out of the power bank for off-grid flexibility.

AEG releases 430 W all-black TOPCon solar module with 22% efficiency

AEG is offering three versions of its new all-black panels, with power outputs of 420 W to 430 W and efficiency ratings ranging from 21.5% to 22.0%. They feature 108 half-cut monocrystalline cells with n-type technology.

1

Chinese PV Industry Brief: Solar module production hit 74.1 GW in Q1

The China Photovoltaic Industry Association reports robust production growth among Chinese solar manufacturers, while the China Nonferrous Metals Industry Association confirms an ongoing decline in polysilicon and cell prices. Canadian Solar, meanwhile, has commenced share trading on the Shanghai Stock Exchange.

2

This website uses cookies to anonymously count visitor numbers. View our privacy policy.

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close